English
  • intloko_ibhena_02

I-engile yabona kabini i-Miter ye-Bevel Miter yabona iManuwali ye-Miter yabona iSika i-45 Degree engile 10″ iSaw yeMiter

I-engile yabona kabini i-Miter ye-Bevel Miter yabona iManual Miter yabona iSika i-45 Degree engile 10″ i-Miter yabona umfanekiso obonakalayo
  • I-engile yabona kabini i-Miter ye-Bevel Miter yabona iManuwali ye-Miter yabona iSika i-45 Degree engile 10″ iSaw yeMiter
  • I-engile yabona kabini i-Miter ye-Bevel Miter yabona iManuwali ye-Miter yabona iSika i-45 Degree engile 10″ iSaw yeMiter
  • I-engile yabona kabini i-Miter ye-Bevel Miter yabona iManuwali ye-Miter yabona iSika i-45 Degree engile 10″ iSaw yeMiter
  • I-engile yabona kabini i-Miter ye-Bevel Miter yabona iManuwali ye-Miter yabona iSika i-45 Degree engile 10″ iSaw yeMiter

Inkcazelo emfutshane:

I-1.ipompo epholileyo iqinisekisa ubomi obude benkonzo ye-saw blade

2. isikali kwi-vise ivumela uhlengahlengiso olulula lokusikwa kwe-engile phakathi kwe-0 ° ~ 60 ° kunye ne-0 ° ~-45 °

3. I-vise yokulungelelanisa ngokukhawuleza ngenxa yokusikwa kwe-angular- i-saw frame frame swivels, kungekhona into

4. I-G4025B ithatha inyathelo le-hydraulic engaphantsi kommiselo wesantya.

I-5.I-force force elawulwa nge-cylinder manual okanye i-hydraulic cylinder.

I-6.Isakhiwo esinamandla sokusika umthamo omkhulu.

7. Iqhekeza elinye lokwakhiwa kwentsimbi yesakhelo se-G4025 / G4025B Ibhendi yentsimbi ethe tyaba yabona umatshini iqinisekisa ii-engile ezichanekileyo kunye nokungcangcazela okuphantsi.

8. Ukusebenzisa itekhnoloji yaseJamani, isarha ehlala ixesha elide, ingxolo ephantsi, umbane ozenzekelayo unqunyulwe emva kokulungiswa.

9. Isetyenziselwa ngokubanzi ukukhangela iintlobo ezahlukeneyo zemivalo kunye neeprofayili zentsimbi eqhelekileyo, insimbi yesixhobo, ubhedu kunye ne-aluminium.Ifanelekile ukugcinwa kunye nokuveliswa kwezinto ezincinci zebhetshi kunye nenkqubo yokusika iingcango kunye neevenkile.


Iinkcukacha zeMveliso

Iithegi zeMveliso

IParameter yobuGcisa

Umzekelo

 

G4025Inkqubo yezandla

G4025BInkqubo yeManuwali ene-hydraulic descent controller
Umthamo wokusika(mm)

0 °

 ● Φ250
■ 280(W)×230(H)		 ● Φ250
■ 280(W)×230(H)

45°

 ● Φ190
■ 180(W)×230(H)		 ● Φ190
■ 180(W)×230(H)

60°

 ● Φ120
■ 115(W)×230(H)		 ● Φ120
■ 115(W)×230(H)

-45 °

 ● Φ190
■ 180(W)×230(H)		 ● Φ190
■ 180(W)×230(H)
Ubungakanani beblade (L*W*T)mm 2750x27x0.9 2750x27x0.9
Saw blade isantya(m/min) 53/79m/min(nge-cone pulley) 53/79m/min(nge-cone pulley)
I-Voltage 380V 50HZ 380V 50HZ
Blade drive motor (kw) 0.85KW/1.1KW 0.85KW/1.1KW
Impompo yenjini yokupholisa(kW) 0.04KW 0.04KW
Iqhekeza lomsebenzi libamba Izandla zisebenza imihlathi Izandla zisebenza imihlathi
Ubone uxinzelelo lweblade Imanyuwali Imanyuwali
Saw uhlobo lokutyisa isakhelo ISilinda yeManuwali Isilinda seHydraulic
Uhlobo lokutyisa izinto Imanyuwali Imanyuwali
Ukuqhuba okuphambili Izixhobo zeentshulube Izixhobo zeentshulube
Ubungakanani obungaphezulu (LxWxH) 1500x900x1300mm 1500x900x1300mm
Ubunzima obububo (KG) 350 450
xaing

Iinkcukacha zoomatshini

I-engile yabona i-bevel miter ephindwe kabini s2

1. Isiqwenga esinye sokwakhiwa kwentsimbi, ii-angles ezichanekileyo kunye ne-vibration ephantsi.

2. Hambisa isarha isarha, hayi imathiriyeli ukufezekisa ukusika imiter.

I-engile yabona i-bevel miter ephindwe kabini s3
I-engile yabona i-bevel miter ephindwe kabini s5

3. Isarha yebhendi ene-cylinder ye-manual (G4025) okanye i-hydraulic cylinder (G4025B) yesarha yesarha eguquguqukayo engenasiphelo.

4. isarha yebhendi ineentlobo ezi-2 zezantya zesarha.

I-engile yabona i-bevel miter ephindwe kabini s4
I-engile yabona i-bevel miter ephindwe kabini s7

5. i-vise eqinile kunye nesenzo esikhawulezayo sokubamba.

6. isiseko esinzima.

I-engile yabona i-bevel miter ephindwe kabini s6

Imveliso eNxulumeneyo

G4018

G-330

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iimveliso ezinxulumeneyo

    • I-Semi Automatic Rotary Angle Bandsaw G-400L

      I-Semi Automatic Rotary Angle Bandsaw G-400L

      Umzekelo weParameter yoBugcisa G-400L Ukusika amandla (mm) 0° Φ 400 ■500(W)×400(H) -45° Φ 400 ■450(W)×400(H) -60° Φ 400 ■400(W) ×400(H) Ukusika iengile 0°~ -60° Ubungakanani beBlade (L*W*T)mm 5800×34×1.1 Isantya seblade yeSaw (m/min) I-Blade drive motor (kw) 4.0KW(5.44HP) Impompo yeHydraulic Injini(kW) 0.75KW(1.02HP) Impompo yempompo epholileyo(kW) 0.09KW(0.12HP) Iqhekeza lomsebenzi elibambayo ...

      Bona iimveliso ezininzi>
    • IMiter yesandla yabona i-45 Degree Miter Sika i-Dual Bevel Miter Saw 7 “X12″ iSaw yeMiter encinci

      I-Miter yesandla yabona i-45 Degree Miter Cut Dual Bevel M...

      Ubuchwephesha beParameter Model G4018 manual system Ukusika umthamo (mm) 0° Φ 180 ■200(W)×180(H) 45° Φ 120 ■120(W)×110(H) Ubungakanani beblade (L*W*T)mm 2360x27x0 .9mm isantya seblade yeSaw (m/min) 34/41/59/98m/min(nge pulley yecone) Voltage 380V 50HZ Blade drive motor (kw) 1.1KW Impompo epholisayo motor(kW) 0.04KW Umsebenzi obambekayo Isandla esisebenza imihlathi Saw blade tension Manual Saw isakhelo ukutya uhlobo Cylinder, manual Materi...

      Bona iimveliso ezininzi>
    • (Umqolo oMbini) I-Angle Engle eRotayo ngokuPheleleyo iBandsaw GKX260, GKX350, GKX500

      (Ikholamu ephindwe kabini) iAngle eRotary eZizenzekelayo ngokupheleleyo Ba...

      Umfanekiso weParameter yoBugcisa GKX260 GKX350 GKX500 Umthamo wokusika (mm) 0° Φ260 ■260(W)×260(H) Φ 350 ■400(W)×350(H) Φ 500 ■1000(W)×500(H)×500(H)×500(H) ° Φ200 ■200(W)×260(H) Φ 350 ■350(W)×350(H) Φ 500 ■700(W)×500(H) -60° * * Φ 500 ■500(W)×500 (H) Ukusika i-engile 0°~ -45° 0°~ -45° 0°~ -60° Ubungakanani beblade (L*W*T)mm 3505×27×0.9 34×1.1 7880×54x1.6 Isantya seblade yeSaw ( m/min) 20-80m/min(ulawulo lokuphindaphinda) Bla...

      Bona iimveliso ezininzi>
    • (Umqolo oMbini) IBandsaw yeAngle eRotary eZizenzekelayo: GKX350

      (Ikholamu ephindwe kabini) iAngle eRotary eZizenzekelayo ngokupheleleyo Ba...

      I-Technical Parameter Model GKX350 Umthamo wokusika (mm) 0° Φ 350 ■400(W)×350(H) -45° Φ 350 ■350(W)×350(H) Ukusika i-engile 0°~ -45° Ubungakanani beblade (L) *W*T)mm 34×1.1 Isantya seblade yeSaw (m/min) 20-80m/min(ulawulo lokuphindaphinda) Blade drive motor (kw) 4.0KW(5.44HP) Hydraulic pump motor(kW) 0.75KW(1.02HP) Ipompo yemoto yokupholisa(kW) 0.09KW(0.12HP) Iqhekeza lomsebenzi elibambayo Isixhobo seHydraulic vice Saw blade tension Hyd...

      Bona iimveliso ezininzi>
    Cofa u-enter ukukhangela okanye i-ESC ukuvala